A refrigerator is a vital piece of equipment at home. Without it, it would be nearly impossible to keep groceries fresh. If the breakdown is a major problem, then it would a good idea to get in contact with refrigerator repair. However, you could troubleshoot and fix simple refrigerator problems. The principle behind keeping food fresh is simple; remove the heat. To accomplish this, a gas (refrigerant) is used to absorb the heat that is generated inside the freezer. A compressor pumps the refrigerant through tubing where it absorbs the heat from the warm air inside.
If your fridge breaks down, it is possible to troubleshoot and fixes the problem yourself. Here are three solutions to three simple problems provided by the experts at Louisville Appliance Repair
•Your Fridge Does Not Cool – This could be due to loss of power. Check that the socket connection is okay. If you open the door and the light does not come on, then check out the following. Make sure the thermostat has not been turned down and also check the air vents to make sure that they are not blocked. Check the coils to make sure they are not blocked. Proper airflow is required to create a chill. Check the condenser fan and clean it if it is clogged up with dust. Your fridge should now run a chill properly.
•Your Fridge Has Puddles of Water – The first culprit is the water supply line connected to the icemaker. If the inlet valve is leaking, tighten the nuts. Replace the copper tube if it is leaking. Check the drain tube to make sure it is not clogged. Blow air through it to make sure that it is clear. If your fridge is in a slanting position, water puddles can form. Experts from refrigerator repair Orange County advice keeping the fridge level to drain water into the pan.
•The Icemaker Is Not Working – To diagnose this problem, check the water tube that supplies water. It can get clogged with ice if the water is trickling slowly. Another problem could be the saddle valve. This can also be clogged with ice. This is very easy to clear by making sure the needle hole is open. Also, check the electric inlet valve. It is advisable to turn off the saddle valve water before disconnecting the inlet valve supply tube. Turn on the saddle valve water supply. If water flow is okay, the problem is a faulty inlet valve. Replacing this should solve the problem.
You should know that refrigerators will operate well if the temperature is above 45 degrees Fahrenheit. When it is too cold, the refrigerant pressure cannot generate a chill. In turn, the freezer can only attain a chill equal to the outside temperature. If you are not able to diagnose and solve the problem, then you should contact refrigerator repair Orange County for assistance.