亚洲无码视频在线观看,国产成人无码久久久精品天美传媒,国产精自产拍久久久久久蜜,少妇被躁www视频无套
噴嘴_脫硝噴槍_霧化噴嘴_sncr噴槍_工業/扇形噴嘴-上海斐卓Hotline:021-57675090
噴嘴_脫硝噴槍_霧化噴嘴_sncr噴槍_工業/扇形噴嘴-上海斐卓
QQ交談
服務熱線
Position: 首頁 > FEIZHUO ENGLISH > PRODUCTS > Denitration gun

SNCR denitration spray gun

Introduction of the characteristics of SNCR denitration spray gun 1. Material of SNCR denitration spray gun: Due to the high working temperature of the SNCR denitrification spray gun, its operating temperature is generally (850 degrees-1100

Application technology consultation: Feizhuo@feizhuo.net     Tel:13916639930


Introduction to the characteristics of SNCR denitration spray gun
1. Material of SNCR denitration spray gun:
Due to the high working environment temperature of the SNCR denitration spray gun, its use temperature is generally (850 degrees -1100 degrees). In the SNCR denitration system, the flow rate of the flue gas in the boiler or pipeline is fast, and the flue gas is mixed with a large amount of dust. In harsh environments, the denitrification spray gun wears severely. The material of the denitration spray gun must be high temperature resistance, corrosion resistance, and wear resistance; the spray gun rod of the denitration spray gun is required to be made of 310SS or higher, which can maintain high strength, corrosion resistance and good wear resistance in an environment below 1200 degrees , Ensure the continuous balance of denitration.

2 The atomization effect of the denitration spray gun and the uniformity of the flue gas mixing
The spray angle of the SNCR denitration spray gun ranges from 15 degrees to 150 degrees, and the penetration power of the liquid is different for different spray angles. A small angle denitration spray gun has strong spray penetration, and a large angle denitration spray gun covers a large area. The length of the denitration spray gun and the spray point into the furnace are different. Use a variety of different angles of denitrification spray guns, the installation position through CFD flow field simulation analysis combined with on-site measurement to obtain a good layout, so as to achieve a higher denitration efficiency.

3. The scalability of the denitration spray gun
SNCR denitration spray gun generally comes with a retractable adjustment function. In one case, when there is a small amount of deviation between the site working conditions and the design, the position of the denitration spray gun can be flexibly adjusted to ensure good denitration efficiency. In addition, when the denitration spray gun is not in use, it can be withdrawn from the furnace at any time, thereby prolonging the service life of the denitration spray gun.

4. Atomized particle size of denitration spray gun
The atomized particles of the SNCR denitration spray gun do not need to be cooled like the flue gas. The finer the better, the moderate flue gas particles can achieve good denitrification efficiency. The particles are too small and the penetration is poor, which reduces the denitration efficiency; the particles are too coarse and the particles are discharged The distribution area is reduced and the denitrification efficiency is reduced. At the same time, due to the fast flue gas flow rate, the spray particles cannot be completely atomized in a short time, and the generated droplets will cause the furnace to burst. Therefore, the atomized particle size should be selected according to the specific situation.

5. The gas temperature inside the boiler determines the installation position of the denitration spray gun
For boilers with urea solution, the denitration spray gun should be installed within the temperature range of 950+50 degrees as far as possible; when ammonia solution is used, the denitration spray gun should be installed at a position of 900+50, and the installation position must avoid the flame. The burning time of the waste liquid is generally required to be above 0.5s to ensure a sufficient reaction; the installation position of the denitration spray gun directly determines the denitration efficiency of the SNCR, and the location of the denitration spray gun is the key point of the SNCR system. The installation of the denitration spray gun is slightly inclined downward, and there is a certain safe distance when it reaches into the furnace;
CFD flow field simulation to determine the injection point;
Install a temperature sensor to test the temperature distribution in the furnace and determine the spray position.
Diagram of the installation position of the denitration spray gun and the physical diagram of the denitration spray gun;
Installation drawing of spray gun
噴槍安裝圖紙安裝圖
sncr-1.jpg

 
噴槍參數

 

 

 

Similar

To provide you with a full range of quality services.

139 1663 9930

Wechat QR code

Telephone:139 1663 9930
Landline:021-57675090
Mailbox:Feizhuo@Feizhuo.net
Website:http://wentworth-miller.net
Address:平湖工廠:浙江省.平湖市新埭鎮創業路1號1幢

波多野结衣被狂揉到高潮 | 四虎少妇做爰免费视频网站四 | 国产成人无码aa精品一 | 亚州精品无码又大又粗 | 狠狠躁日日躁夜夜躁A片小说免费 | 日韩国产欧美在线观看 | 五十路老熟女 码A片 | 女人18片一级毛片A片小说 | 91麻豆产精品久久久久久夏晴子 | 无码人妻一区二区三区免费NTR | 8x8ⅹ人成视频免费入口 | 亚洲AV无码秘 蜜桃香奈 | 四川寡妇高潮AAA片毛片 | 亚洲秘 无码一区二区三区 91久久精品一区二区三 | 一本久久久综合狠狠躁 | 国产精品久久久久久久无码 | 一级无码内谢少妇A片 | 葵司精品一区二区三区视频 | 西西4444WWW无码视频 | 国产一级做a爱片毛片A片男 | 亚洲日韩精品欧美一区二区三区 | 国产一级a爱做片免费☆观看 | 日本特级黄色视频 | 91精品国产乱码久久久 | 上床视频一区二区网站 | 亚洲国产天堂AV | 欧美日韩一区二区三区在线观看 | 国产老熟女伦老熟妇 | 免费一级A片高潮6次 | 91丝袜精品久久久久久无码人妻 | 91人妻人人做人碰人人爽九色 | 国产 在线观看免费视频 | 国产裸体美女永久免费无遮挡 | 久久久精品久久久欧美俄罗乱妇 | 成人无码区免费A片在线软件 | 岳胥乱一区二区三区视频 | 婷婷五月天综合网 | 国产午夜AAA片无码无片久久 | 黄色成人视频在线观看 | 无码精品人妻一区二区三区免费 | 久久精品无码一区 |